How to Alter a Dress or Top With Binding

You may have a garment that has bias binding along the armhole or neckline edge and you wonder how to alter it.

The binding is a separate, narrow, bias strip of fabric that is sewn on to the garment.

Here is an example of what binding looks like:

sewing-blog-10122.jpg

Many customers ask me to make this alteration by just pinching the blouse in and sewing right across the binding.

But what they don’t realize, is that it results in a thick and cumbersome seam.

Instead, I like to take the garment and binding apart and resew them so that the garment looks the same as it did before the alteration.

This customer needed the shoulder seams taken up and the side seams taken in.

(You may recognize this blouse from the post I wrote on French Seams.

Instead of writing a second post on French Seams, I went back yesterday and added to that post.

So, if you missed it, you’ll want to go back and read How To Alter French Seams again.)

This customer decided she didn’t want French Seams put back in.

Instead, she wanted me to serge the edges.

So, that is what I did.

Let’s walk through the alteration process.

First, I began by taking out the stitches at the shoulder area.

Since I had to take up the shoulder seams 1/2″, I ripped out about an inch of the binding from the shoulder seam towards the front of the top.

This top is made from chiffon.

Whenever I am working with chiffon, I like to do the seam ripping from the wrong side of the garment because it is delicate and I have to be careful not to snag any threads while ripping out the seam.

sewing blog 1010

You’ll realize that the binding will be larger in circumference than the neck edge once the alteration is made, so you’ll have to alter the binding as well as the garment.

The same will be true of the armhole edge once the shoulder seam and the side seams are taken in.

I’ll show you how to alter the armhole in the next step after we finish this neck edge.

Back to the neck edge:

I took out the entire binding on the back neckline . (The other option would be to put a seam in the binding at the shoulder seam spot.)

I don’t want to do that because it will add more bulk to that area and it’s difficult to work with binding in a small area like that.

With this blouse, the neck binding extends beyond the back edge of the blouse to make ties, so it’s much easier to take out the binding in this case than to make a seam in the binding anyway.

This is what it should look like once you’ve removed the binding:

sewing blog 1009

You also need to remove the binding where the shoulder seam meets the armhole.

Take it out from the shoulder seam to the side seam.

I took mine out down the back of the blouse. That way, if I make any mistakes, it’s less noticeable on the back than it would be on the front:

sewing blog 1009

You will take the binding out all the way to the side seam because that is where a seam already exists.

Now, alter the shoulder seam itself:

sewing blog 1006

In this case, I just stitched the front and back sides of the blouse right sides together and left the seam allowance alone.

It wasn’t too bulky and I thought it would look better than cutting off the excess and serging the edge.

Next, fold the binding along the fold lines and just sew the binding back on to the neck edge following the same exact stitching lines that the manufacturer used.

That way, it will look professional, like you never did the alteration:

sewing blog 1005

Now, let’s alter that side seam.

This blouse had 2 layers.

The outer layer was the chiffon and the under layer was lining made of polyester.

The manufacturer had sewn these two layers together at the underam area.

So, just take out the stitching and separate the 2 layers:

sewing blog 1007

Now, alter each layer separately.

You can see the outer layer chiffon fabric on the left and the lining on the right:

sewing blog 1004

The next step is to finish the edge of each of the seams.

I used a serger to cut off the seam allowances and finish them:

sewing blog 1003

Now, do you see the original seam in the binding (just right of my thumb in the photo below)?:

sewing blog 1002

Take it apart at the seam.

(If there is plenty of extra fabric, then just cut it apart at the seam.):

sewing blog 1001

Next, I mark where the new seam should go by using pins.

You could use a washable marker if you prefer.

To mark it, I put the pin in the binding at the point where the side seam matches it:

sewing blog 1000

I put a pin on both sides of each binding strip:

sewing blog 999

Then, I match the pins and the strips right sides together and stitch across the binding strip creating the new seam:

sewing blog 997

Open that seam out and make sure the fold lines of the binding strip match up.

If they don’t, resew the seam until they do.

This is important so that the binding will lie flat.

sewing blog 996

Trim the seam if you need to in order to reduce bulk.

Line the binding back up with the garment and sew along the original seam line:

sewing blog 995

This is what the new seam line should look like:

sewing blog 994

I think you’ll find that this method works well on all sorts of items: tote bags, T-shirts, vests, dresses, purses, etc.

I’d love to hear what you use this application for.