Can you save the planet by mending one bed sheet? Probably not, but it will save you alot of money to do it yourself and repurpose it.
I have a large hole in one of my bedsheets. Typically, my washing machine eats these on a regular basis if I don’t have a full load. I could just zig zag over the hole, but that would not leave it flat and chances are, it would tear again very soon because it would be weak where I stitched it. This is what happened the last time I tried to fix it. (See photo below) I did put a plush piece of thermolam under the previous hole and tightly zig zagged over the rip, but it wasn’t stable enough with all the washings. SO, now we’re going to get serious.
Who wants a weak and wimpy bed sheet?
Wimpy, wimpy, wimpy.
Ok, here’s how to fix it. Get out a scrap piece of cloth that closely matches said bed sheet. Wait a minute, who is going to see this thing anyway? No one. So, get out any scrap piece of fabric, the crazier the better. The only recommendation I have is that you find a soft piece in case your little toes, fingers or nose rub up against it in the night.
Mine has to match because my mom was a neat freak and I inherited the gene, and even though she’ll never see it because she’s been gone 15 years, this is how it has to be.
Hey, you never forget what your mom taught you.
First, cut the fabric to be a little larger than the area you are mending. Now, if you have a serger, serge around the edges of the scrap. If you have a regular sewing machine, zig zag around all the edges. Now, pin the patch over the hole. Your pins should be perpendicular to the line that you will sew. This is so when you get close to the pin, a) you can pull it out easily and b) if you do happen to run over the pin, chances are better that you won’t break your needle.
Actually, don’t run over your pins! It’s a bad habit.
Plus, if you sew over pins, I recommend wearing eye protection: glasses or goggles of some sort.
I’ve had a few pins and needles break and one got awfully close to my left eyeball. That was enough to convince me that eye protection is so important.
The next step is to sew around the perimeter of the patch close to the edge. If you feel the need, sew around the patch a second time.
Then, stitch across the patch (just eyeball it…remember no one is gong to see this because you’re not going to use these for guest sheets, right? Right.)
Then, turn the patch the other direction and stitch across in vertical rows going this way. Now it looks like a sewn grid. Perfect. That’s how you want it to look.
Now, if you want it to be super durable (and I should think you do. After all, it’s alot easier now than down the road. For heaven’s sake, you already have it under the machine!) Repeat the process entirely by putting another patch on the other side of the sheet, covering all the work you just did and do it again. If you’re particular, do the backside first and then the front. If you do it that way, you’ll see this (photo above) on the top side.
Now, get out there and do some arm bending sheet mending!
And here’s a post if you want to learn How to permanently fix a mattress pad.